Copley Controls Serial Encoder Guia do Utilizador descarregar pdf (Página 107)

Xenus XTL User Guide Quick Setup with CME 2

Copley Controls Corp. 99

5.7.3: Digital Position Input

For more information, see Digital Input (p. 18).

5.7.3.1 Click Digital Position Inputs to open the Digital Position Input screen,

Configuration tab.

5.7.3.2 Set the options described below:

Option Description

Control Input

Pulse and Direction: One input takes a series of pulses as motion step commands, and

another input takes a high or low signal as a direction command.

Pulse Up / Pulse Down: One input takes each pulse as a positive step command, and

another takes each pulse as a negative step command.

Quadrature: A/B quadrature commands from a master encoder (via two inputs) provide

velocity and direction commands.

Increment

position on

Rising Edge: Increment position on the rising edge of the input pulse.

Falling Edge: Increment position on the falling edge of the input pulse.

Stepping

Resolution

Input Pulses: Number of Input Pulses required to produce output counts.

Range: 1 to 32,767. Default: 1.

Output Counts: Number of Output Counts per given number of input pulses.

Range: 1 to 32,767. Default: 1.

Invert Command When selected, inverts commanded direction.

5.7.3.3 In position mode, click the Trajectory Limits tab.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 179 180

Sem comentários

Copley Controls Serial Encoder Guia do Utilizador Página 107